Our Products Are #1!

Sealers Solvent
Sealers Solvent Free
Seals for roof & paving
Tarmac renovators
Cleaning products
ECO~SEAL SF is milky white when applied and dries to a very durable transparent film. It should be thoroughly worked into the joints and crevices.

ECO~SEAL SF is best applied with a brush, roller or sprayer, leaving it to remain on the surface for 2 - 3 minutes before rollering it off -- it is important to ensure that ECO~SEAL SF is not allowed to pool, pond or puddle on the surface of the substrate because this will prevent drying and proper film~forming of the resin.

Allow ECO~SEAL SF to dry for up to 24 hours before walking on the surface, and 72 hours before driving on it.

Do not apply more than one coat of ECO~SEAL SF at a time. Once curing has started it is difficult to remove. Clean off accidental spillages immediately with a damp cloth. A second coat can be applied once the first coat has dried completely and is firm & dry to the touch.
Application Instruction
The manufacturer has no control over the use and application of its products and is therefore not liable for
any problems or issues arising from their use.
Keychem strives to deliver the best in high-value, low-priced products

07767 805 999